255 | WaterBorne Urethane

Waterborne Urethane Finish, 255 is a low viscosity version of the 250. 255 is easy to spray with a low pressure spray system such as a turbine, or LVLP system. This is Fuhr’s best coating for on-site application to wood floors.

Suggested Use

Wood Flooring

Application Method

1. Prep. Sand
150-180 grit Aluminum Oxide Sand paper

2. Stain (Optional)

Apply according to product specifications.

3. Seal
Apply 3-5 wet mils of 255 as a seal coat to the dried stained surface.

4. Sanding
Allow 255 to dry completely, and thoroughly sand with 180-220 grit Aluminum Oxide Sand paper

5. Topcoat
Apply 3-5 wet mils of 255. Repeat steps 4 and 5 for additional build and protection.

Suggested Use


New Products

Most Popular Products