Waterborne Urethane Finish, 255 is a low viscosity version of the 250. 255 is easy to spray with a low pressure spray system such as a turbine, or LVLP system. This is Fuhr’s best coating for on-site application to wood floors.
1. Prep. Sand 150-180 grit Aluminum Oxide Sand paper 2. Stain (Optional) Apply according to product specifications. 3. Seal Apply 3-5 wet mils of 255 as a seal coat to the dried stained surface. 4. Sanding Allow 255 to dry completely, and thoroughly sand with 180-220 grit Aluminum Oxide Sand paper 5. Topcoat Apply 3-5 wet mils of 255. Repeat steps 4 and 5 for additional build and protection.
Fuhr Wood Coatings. The most extensive line of waterbase wood coatings for over 30 years.© 2012 Fuhr Industrial a division of CCI Coatings & a RPM Wood Finishes Group Company. All Rights Reserved.