productHeadings_pigmented

9300 | High Performance Pigmented Urethane

High Performance Pigmented Urethane, 9300 is a single pack, fast cure self crosslinking urethane. It is a high performance pigmented coating which provides superior chemical and abrasion resistance. It dries and cures very rapidly. In most environments, 9300 will dry in under an hour and cure completely in as little as four days. 9300 High performance pigmented urethane is recommended for use on wood floors, high end millwork, cabinets and furniture and exterior wood surfaces such as entry doors. For exterior applications, 9300 must be used as both seal coat and topcoat.

Application Method

1. Prep. Sand
150-220 grit Aluminum Oxide Sand paper

2. Seal
Apply 3-5 wet mils of 9560 primer according to product specifications for interior applications. Apply 3-5 wet mils of 9300 urethane as a sealer for exterior applications.

3. Sand
Sand the primed surface with 180-220 grit Aluminum Oxide Sand paper.

4. Seal(optional)
Apply 3-5 wet mils of 9300 topcoat as a sealer for porous surfaces such as oak to help fill the grain. When the surface is completely dry, repeat step 3.

5. Topcoat
Apply 3-5 wet mils of 9300. Repeat steps 3 and 5 for additional build and protection.

Suggested Use

PRODUCT CATEGORIES

Pigmented Coatings

New Products

Most Popular Products