productHeadings_pigmented

9802 | Vacuum Coat White Primer

Vacuum Coat White Primer, 9802 is the primer of choice for industrial applications. 9802 can be used on all unfinished interior wood surfaces as well as MDF and Hardboard for superior grain filling capabilities. 9802 has rapid drying characteristics, and can be exposed to heated curing systems immediately after application. This product can be applied by spray, roll coater, vacuum coater, or curtain coater for the most stringent primer lines. It contains high solids and very low VOC.

Application Method

1. Prep. Sand
150-220 grit Aluminum Oxide Sand paper (for wood surfaces, this is not
necessary for MDF or Hardboard)

2. Seal

Apply 1-4 wet mils of 9802 primer to unfinished surface using industrial equipment.

3. Sand
Sand the primed surface with 180-220 grit Aluminum Oxide Sand paper.

4. Seal(optional)
Repeat steps 2 and 3 for additional build.

5. Topcoat
Apply according to product specifications.

Suggested Use

PRODUCT CATEGORIES

Pigmented Coatings

New Products

Most Popular Products