productHeadings_specialty

855 | Aluminum Oxide Modified Urethane

Aluminum Oxide Modified Urethane is a 33% solids uniquely formulated water based urethane floor finish designed to replace conventional oil modified urethane finishes. 855 has been enhanced with Aluminum Oxide for extended abrasion resistance and longevity. This product meets KCMA standards and is rated for interior or exterior use.

Application Method

1. Prep. Sand
150-180 grit Aluminum Oxide Sand paper

2. Stain (Optional)
Apply according to product specifications.

3. Seal
Apply 3-5 wet mils of 855 as a seal coat to the dried stained surface.

4. Sanding
Allow 855 to dry completely, and thoroughly sand with 180-220 grit Aluminum Oxide Sand paper

5. Topcoat
Apply 3-5 wet mils of 855. Repeat steps 4 and 5 for additional build and protection.

Suggested Use

 

 

PRODUCT CATEGORIES

Specialty Products

New Products

Most Popular Products