1. Prep. Sand
180-220 grit Aluminum Oxide Sand paper
2. Condition (Optional)
Use product 155 clear as a conditioner to minimize blotchiness or uneven stain absorption.
3. Apply Stain
Apply 105 stain until the entire surface is wet.
Wipe the stained surface with a clean bleached cotton cloth in the direction of the grain to obtain grain clarity.
5. Seal and Glaze (optional)
After the stain has dried completely, apply a sealer and topcoat. For an antique effect, apply Fuhr 195 Glaze after applying a seal coat